Model 2812 Semi Automatic Debagger

Model 2812 typical installation feeding an alpine conveyor

Click image to watch short video.
Contact Dyco for access to full length video.

The model 2812 is typically used for square and rectangular containers and offers the fastest speeds of the Dyco semi-automatic debaggers. The operator places a bundle on the back of the machine in the slit and strip area. The operator feeds the bag into a hooked safety knife and depresses a foot pedal. The foot pedal actuates a pneumatic cylinder to which the knife is mounted, which travels across the side of the bundle, cutting one edge of the bundle open. The operator then pulls the bag from the containers opposite the knife location, stripping the bag off the bundle. Once the bag is removed from the bundles, the operator actuates the lift gate with another foot pedal. The lift gate opens and the containers travel down a mat top accumulation conveyor to the feed end of the machine. Once the containers are clear, the gate lowers and the knife returns to it’s home position. Square and rectangular containers travel down the mat top conveyor to the indexing feed end of the machine. The indexer works in conjunction with a “hold down” mechanism that holds the previous row of containers back, eliminating interference and pressure from the row being discharged.  Once the hold down is in place the backer bar retracts, and the bottles are pushed out of the machine by a side mounted wiper mechanism. The wiper mechanism is driven with a variable frequency drive controlled motor and accelerates the containers onto the exit conveyor, which carries the containers single file, typically onto an accumulation conveyor to a filler.

Why Choose Dyco

  • Most widely used semi-automatic debagging solution in the dairy, juice, and water industries
  • Live 3.25” table top discharge conveyor with AC variable speed drive (optional additional table top conveyor available upon request)
  • Safety cold knife assembly included in standard machine
  • Container hold down and pressure release mechanisms on discharge end of machine to ensure container orientation is maintained and prevent jams

Model 2812 feeding Dairy Gallon containers

Model 2812 feeding dairy gallon containers

Hold down/pressure release assembly guarantees your contains maintain orientation


If you like this you may also like:


Contact Us | Privacy Policy | Site Map | Site Credits: Ecreativeworks