Model 4200 Semi Automatic Debagger

Machine discharge conveyor with single filing rails

Click image to watch short video.
Contact Dyco for access to full length video.

The model 4200 debagger is Dyco’s solution to the debagging of round containers. The operator places a bundle on the back of the machine in the slit and strip area. The operator feeds the bag into a hooked safety knife and depresses a foot pedal. The foot pedal actuates a pneumatic cylinder to which the knife is mounted, which travels across the side of the bundle, cutting one edge of the bundle open. The operator then pulls the bag from the containers opposite the knife location, stripping the bag off the bundle. Once the bag is removed from the bundles, the operator actuates the lift gate with another foot pedal. The lift gate opens and the containers travel down a mat top accumulation conveyor to the feed end of the machine. Once the containers are clear, the gate lowers and the knife returns to it’s home position.  The bottles travel down a mat top chain and are funneled onto a table top conveyor. There is a side mounted, low backpressure, tabletop conveyor to orient the containers such that they can be discharged from the machine in a single row.

Why Choose Dyco

  • Mat-top accumulation conveyor with 3.25" table-top exit conveyor
  • Low back pressure backer belt in single filing area to ensure containers do not log jam
  • Dyco debaggers utilize standard, off-the-shelf components and motors to ease maintenance

Machine discharge conveyor with single filing rails

Machine discharge conveyor with single filing rails

Backer belt assembly to prevent log jams

Backer belt assembly to prevent log jams

Bag cutter knife with safety enclosure

Bag cutter knife with safety enclosure


If you like this you may also like:


Contact Us | Privacy Policy | Site Map | Site Credits: Ecreativeworks